Installation

POWER STEERING: VANE PUMP: INSTALLATION

INSTALLATION

1. INSTALL VANE PUMP ASSEMBLY





(a) Using a "torx" socket (E10), install the vane pump with the stud bolt.
Torque: 22 Nm (224 kgf-cm, 16 ft-lbf)
(b) Install the 2 bolts and nut.
Torque: 43 Nm (438 kgf-cm, 32 ft-lbf)
2. INSTALL VANE PUMP V BELT





(a) Loosen the belt tension by turning the belt tensioner counterclockwise, and install the bolt.
3. CONNECT PRESSURE FEED TUBE ASSEMBLY





(a) Install the union bolt with a new gasket on each side of the tube.
Torque: 51 Nm (520 kgf-cm, 38 ft-lbf)
4. CONNECT OIL RESERVOIR TO PUMP HOSE NO. 1





(a) Install the hose with the clip.





(b) Install the 2 hoses with the 2 clips.
5. INSTALL AIR CLEANER ASSEMBLY
6. ADD POWER STEERING FLUID Power Steering System
7. BLEED POWER STEERING FLUID Power Steering System
8. INSPECT POWER STEERING FLUID LEAK Power Steering System