Installation

PROPELLER SHAFT: FRONT PROPELLER SHAFT ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL FRONT PROPELLER SHAFT ASSEMBLY





(a) Align the matchmarks on the yoke and differential flange.
(b) Install the propeller shaft assembly with the 4 bolts, 4 nuts and 4 washers.
Torque: 88 Nm (898 kgf-cm, 65 ft-lbf)





(c) Align the matchmarks on the yoke and transfer flange.
(d) Install the propeller shaft assembly with the 4 nuts and 4 washers.
Torque: 88 Nm (898 kgf-cm, 65 ft-lbf)
2. INSTALL REAR ENGINE UNDER COVER ASSEMBLY
3. INSTALL TRANSMISSION UNDER COVER