Sliding Roof System (For Multi-Panel Moon Roof)

SLIDING ROOF: SLIDING ROOF SYSTEM (for Multi-panel Moon Roof): INITIALIZATION

INITIALIZATION

1. RESET SLIDING ROOF MOTOR
(a) The sliding roof may not operate automatically and the jam protection function will not function correctly after you reconnect, replace or recharge the battery. In any of these cases, reset the sliding roof system using the following method.
(1) Press the sliding roof switch on SLIDE CLOSE or TILT DOWN side and hold it. When the roof glass stops at the fully closed position for 1 second, the reset of the motor is completed.
HINT: If the battery terminal is disconnected, the ECU of the sliding roof motor may not detect the position of the roof glass. If the AUTO operation function is still disabled even after the sliding roof motor is reset, the Hall IC (built in the sliding roof motor assembly) for detecting the roof glass position may be malfunctioning.