Removal

POWER STEERING: VANE PUMP: REMOVAL

REMOVAL

1. REMOVE FRONT WHEEL RH
2. REMOVE ENGINE UNDER COVER ASSEMBLY
3. REMOVE NO. 2 ENGINE UNDER COVER
4. DRAIN POWER STEERING FLUID
5. REMOVE FAN & GENERATOR V BELT
HINT:
Removal

6. DISCONNECT NO. 1 FLUID RESERVOIR TO PUMP HOSE





(a) Slide the clip and disconnect the No. 1 fluid reservoir to pump hose from the vane pump assembly.
7. DISCONNECT PRESSURE FEED TUBE ASSEMBLY





(a) Remove the union bolt and disconnect the pressure feed tube assembly from the vane pump assembly.
(b) Remove the bolt and separate the pressure feed tube clamp.
(c) Remove the gasket from the pressure feed tube assembly.
8. DISCONNECT POWER STEERING FLUID PRESSURE SWITCH CONNECTOR





(a) Disconnect the fluid pressure switch connector.
9. REMOVE VANE PUMP ASSEMBLY





(a) Using SST, loosen bolt (A) and remove bolt (B), and then remove the vane pump assembly.
SST: 09249-63010





(b) Remove the bolt from the vane pump assembly.