Removal

WIPER AND WASHER: FRONT WIPER MOTOR: REMOVAL

REMOVAL

1. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH
(a) Remove the 2 nuts and the front wiper arm and blade assembly RH.
2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH
(a) Remove the nut and the front wiper arm and blade assembly LH.
3. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY

(a) Remove the 2 clips.
(b) Disengage the 6 claws and the clamp, and remove the cowl top ventilator louver sub-assembly.
4. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
(a) Disconnect the connector.

(b) Remove the 5 bolts and the windshield wiper motor and link assembly.
5. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY

(a) Using a screwdriver wrapped with protective tape, separate the rod of the wiper link assembly from the windshield wiper motor assembly as shown in the illustration.

(b) Remove the nut and washer. Then, put the matchmarks on the crank arm assembly and windshield wiper motor assembly.