Removal

TIRE PRESSURE MONITORING: TIRE PRESSURE WARNING VALVE: REMOVAL

1. REMOVE FRONT WHEEL

2. REMOVE REAR WHEEL

3. REMOVE TIRE PRESSURE WARNING VALVE AND TRANSMITTER

(a) Remove the valve core and cap, and release the air from the tire.

(b) After ensuring that a sufficient amount of air has been released, remove the nut and washer that are used to secure the tire pressure warning valve and transmitter in place, and drop the tire pressure warning valve and transmitter inside the tire.

HINT
Keep the removed cap, valve core, nut and washer.

(c) Disengage the bead using the shoe of a tire remover.

Text in Illustration









NOTICE:
* Be careful not to damage the tire pressure warning valve and transmitter due to interference between the valve and the tire bead.
* Set the tire remover shoe as shown in the illustration.

Width (A):

10 to 20 mm (0.394 to 0.787 in.)

(d) Remove the bead on the upper side.

(e) Take out the tire pressure warning valve and transmitter from the tire and remove the bead on the lower side.

(f) Remove the grommet from the tire pressure warning valve and transmitter.

HINT
Do not reuse the grommet.