ECM Communication Stop Mode
CAN COMMUNICATION SYSTEM: ECM Communication Stop Mode
ECM Communication Stop Mode
DESCRIPTION
HINT: "Engine" and "ECT" refer to the circuit that includes the ECM.
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
1. CHECK WIRE HARNESS (+B1, +B, E)
(a) Turn the engine switch off.
(b) Disconnect the ECM connectors (E4) and (A5).
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(d) Measure the voltage according to the value(s) in the table below.
Standard voltage:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE ECM