Installation

1UR-FSE ENGINE MECHANICAL: DRIVE BELT: INSTALLATION

INSTALLATION

1. INSTALL V-RIBBED BELT






(a) Install the V belt as shown in the illustration.
NOTE: Check that the drive belt is properly set to each pulley.
(1) Rotate the tensioner pulley counterclockwise, and then remove the fix bar.
2. INSTALL INTAKE AIR CONNECTOR PIPE Installation

3. INSTALL NO. 1 AIR CLEANER INLET Installation

4. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY Installation

5. INSTALL V-BANK COVER SUB-ASSEMBLY Installation