Windshield Washer Spray Nozzle: Adjustments

WIPER AND WASHER: WASHER NOZZLE: ADJUSTMENT

ADJUSTMENT

1. ADJUST WASHER NOZZLE SUB-ASSEMBLY





(a) Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.
NOTE:
Be careful not to damage the windshield.
HINT: Tape the screwdriver tip before use.





(b) Disconnect the washer nozzle sub-assembly from the washer hose.
NOTE:
Washer nozzles cannot be reused.

(c) Select a washer nozzle sub-assembly so that the washer fluid spray area is within the standard.





(d) Connect the selected washer nozzle sub-assembly to the washer hose.
(e) Engage the 2 claws and install the washer nozzle sub-assembly.