Removal

INSTRUMENT PANEL: REAR CONSOLE BOX: REMOVAL

REMOVAL

1. REMOVE FRONT CONSOLE UPPER PANEL GARNISH
(a) Using a screwdriver, disengage the claws and remove the garnish.
HINT: Tape the screwdriver tip before use.

2. REMOVE CONSOLE UPPER PANEL ASSEMBLY





(a) Turn the shift lever knob in the direction indicated by the arrow and remove it.





(b) Using a screwdriver, disengage the 9 clips.
HINT: Tape the screwdriver tip before use.

(c) Remove the console upper panel assembly and then disconnect the connector.
3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH





(a) Remove the screw.
(b) Using a screwdriver, disengage the 3 clips and 3 claws.
HINT: Tape the screwdriver tip before use.

(c) Remove the instrument panel finish panel end RH.
4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH





(a) Remove the screw.
(b) Using a screwdriver, disengage the 4 clips and 3 claws.
HINT: Tape the screwdriver tip before use.

(c) Remove the instrument panel finish panel end LH.
5. REMOVE CONSOLE BOX PLATE





(a) Using a screwdriver, disengage the 4 clips.
HINT: Tape the screwdriver tip before use.

(b) Remove the console box plate and then disconnect the connector.
6. REMOVE CONSOLE BOX REGISTER ASSEMBLY





(a) Using a screwdriver, disengage the 4 clips and remove the console box register assembly.
HINT: Tape the screwdriver tip before use.

7. REMOVE CONSOLE BOX ASSEMBLY





(a) Remove the 4 bolts and 2 screws.
(b) Remove the console box assembly and then disconnect the connector.