Removal

WIPER AND WASHER: WIPER SWITCH: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
3. REMOVE NO. 3 STEERING WHEEL COVER LOWER Removal
4. REMOVE NO. 2 STEERING WHEEL COVER LOWER Removal
5. REMOVE STEERING PAD Removal
6. REMOVE STEERING WHEEL ASSEMBLY Removal
7. REMOVE STEERING COLUMN COVER Removal
8. REMOVE SPIRAL CABLE WITH STEERING SENSOR Removal





9. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
(a) Disconnect the connector.
(b) Detach the claw and remove the wiper switch.
NOTE:
If the claw is pushed with excessive force, it may break.