Installation

SUPPLEMENTAL RESTRAINT SYSTEM: DRIVER SIDE KNEE AIRBAG ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY





(a) Connect the connector.
NOTE:
When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Install the driver side knee airbag assembly with the 4 bolts.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation
3. INSTALL NO.1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation
4. INSTALL INSTRUMENT SIDE PANEL Installation
5. INSTALL FRONT DOOR OPENING TRIM COVER Installation
6. INSTALL FRONT DOOR SCUFF PLATE (w/o Illumination) Installation
7. INSTALL FRONT DOOR SCUFF PLATE (w/ Illumination) Installation
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
9. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light Diagnosis System.