Removal

ENGINE HOOD / DOOR: LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH: REMOVAL

REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTE:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal
4. REMOVE INSTRUMENT SIDE PANEL RH Removal
5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal
6. REMOVE INSTRUMENT PANEL LOWER Removal
7. REMOVE NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY LOWER Removal
8. REMOVE NO. 2 INSTRUMENT CLUSTER MOULDING Removal
9. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal
10. REMOVE LUGGAGE DOOR OPENING CANCEL SWITCH ASSEMBLY





(a) Detach the cancel switch.