Voice is not Recognized

NAVIGATION: NAVIGATION SYSTEM: Voice is not Recognized

Voice is not Recognized

INSPECTION PROCEDURE

PROCEDURE

1. CHECK MAP DISC




(a) Check that the map disc is not deformed or cracked.
OK:
No deformations or cracks on map disc.
NG -- REPLACE MAP DISC
OK -- Continue to next step.
2. CHECK MAP DISC




(a) Check for dirt on the map disc surface.
OK:
No dirt is on the map disc surface.
HINT: If the disc is dirty, clean the disc by wiping the disc's surface radially with a soft cloth.
NOTE:
Do not use conventional record cleaner or anti-static preservative.

NG -- CLEAN MAP DISC
OK -- Continue to next step.
3. CHECK MICROPHONE (NAVIGATION CHECK MODE)




(a) Enter the Navigation Check mode's Microphone Check Navigation Check Mode.
(b) Follow the directions on the screen. Check that the word recognition indicator is displayed in green in each item.
OK:
All check items are recognized.
NG -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
OK -- REPLACE NAVIGATION ECU