Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously

Disassembly

BRAKE: FRONT BRAKE: DISASSEMBLY

1. REMOVE CYLINDER BOOT

(a) Using a screwdriver, remove the 4 cylinder boots from the disc brake cylinder.

2. REMOVE FRONT DISC BRAKE PISTON

(a) Prepare a wooden plate to hold the pistons.

(b) Place the plate between the pistons and insert a pad into one side.

(c) Use compressed air to remove the pistons alternately from the disc brake cylinder.

CAUTION:
Do not place your fingers in front of the pistons when using compressed air.

3. REMOVE PISTON SEAL

(a) Using a screwdriver, remove the 4 piston seals from the disc brake cylinder.

4. REMOVE FRONT DISC BRAKE BLEEDER PLUG

(a) Remove the front disc brake bleeder plug from the disc brake cylinder.

5. REMOVE FRONT DISC

(a) Put matchmarks on the front disc and the axle hub.

(b) Remove the front disc.