Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
AA80E Automatic Transmission
AA80E AUTOMATIC TRANSMISSION: FLOOR SHIFT ASSEMBLY: ADJUSTMENT
1. ADJUST SHIFT LEVER POSITION
(a) Remove the nut and disconnect the shifting rod.
(b) Turn the control shaft lever of the park/neutral position switch counterclockwise until it stops, and turn it clockwise 2 notches to set it to the N position.
(c) Move the shift lever to the N position and tighten the nut while lightly pushing the lever toward the R position.
Torque : 13 Nm (133 kgf-cm, 10 ft-lbf)
NOTICE:
Do not push the shift lever too hard.
(d) Check that the shift lever moves smoothly and the shift lever and gear operate correctly.