Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2010 >> GS 350 RWD V6-3.5L (2GR-FSE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Information Bus >> Testing and Inspection >> Component Tests and General Diagnostics >> Gateway CAN ECU Communication Stop Mode
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Gateway CAN ECU Communication Stop Mode





CAN COMMUNICATION: CAN COMMUNICATION SYSTEM: Gateway CAN ECU Communication Stop Mode
- Gateway CAN ECU Communication Stop Mode

DESCRIPTION





WIRING DIAGRAM

HINT
For vehicles with 1UR-FSE and Active Stabilizer Suspension System, or intuitive parking assist system.







PROCEDURE

1. CHECK CAN BUS LINE FOR DISCONNECTION (GATEWAY CAN ECU SUB BUS LINE)

(a) Turn the engine switch off.





(b) Disconnect the gateway CAN ECU connector (V39).

(c) Measure the resistance according to the value(s) in the table below.

Standard resistance:





NG -- REPAIR OR REPLACE GATEWAY CAN ECU SUB BUS LINE OR CONNECTOR (CAN-H, CAN-L)
OK -- Continue to next step.

2. CHECK WIRE HARNESS (BATT, IG1, IG2, GND)

(a) Measure the resistance according to the value(s) in the table below.





Standard resistance:





(b) Measure the voltage according to the value(s) in the table below.

Standard voltage:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- REPLACE GATEWAY CAN ECU
pro multis · About Operation CHARM