Removal

SUPPLEMENTAL RESTRAINT SYSTEM: CURTAIN SHIELD AIRBAG ASSEMBLY: REMOVAL

HINT
* Use the same procedures for the RH side and LH side.
* The procedures listed below are for the LH side.
1. PRECAUTION

CAUTION:
Be sure to read "PRECAUTION" thoroughly before servicing Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.

3. REMOVE ROOF HEADLINING ASSEMBLY

HINT
Refer to the procedures up to "REMOVE ROOF HEADLINING ASSEMBLY" Removal.

4. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY

(a) Disconnect the connector.

NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Remove the 2 clips.

(c) Remove the 9 bolts and curtain shield airbag assembly.