Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2010 >> IS 250C V6-2.5L (4GR-FSE) >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Starter Motor >> Service and Repair >> Removal and Replacement >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





4GR-FSE STARTING: STARTER: INSTALLATION

1. INSTALL STARTER ASSEMBLY

(a) Install the starter with the 2 bolts.





Torque : 58 Nm (591 kgf-cm, 43 ft-lbf)

(b) Connect the wire harness to terminal 30 and install the nut, and then attach the terminal cap.

Torque : 9.8 Nm (100 kgf-cm, 87 in-lbf)

(c) Connect the terminal 50 connector to the starter assembly.

2. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY LH

HINT
Installation.

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

4. INSPECT FOR EXHAUST GAS LEAK
pro multis · About Operation CHARM