Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2010 >> IS 350 V6-3.5L (2GR-FSE) >> Repair and Diagnosis >> Accessories and Optional Equipment >> Navigation System >> Navigation Display >> Service and Repair >> Removal

Removal





NAVIGATION: MULTI-DISPLAY: REMOVAL

1. PRECAUTION (w/ Navigation System for HDD)

Service Precautions

NOTICE:
* After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.
* A hard disk drive (HDD) is built into the display and navigation module display to store map data etc. which will be used for the navigation system. Therefore, make sure to read all of the precautions thoroughly before handling the display and navigation module display.
* When removing or installing the hard disk drive, eliminate static electricity by touching the vehicle body to prevent components from being damaged.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Navigation System for HDD)

3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission) Removal

4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) Removal

5. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission) Removal

6. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission) Removal

7. REMOVE CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission) Removal

8. REMOVE REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Removal

9. REMOVE FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Removal

10. REMOVE FRONT ASH RECEPTACLE SUB-ASSEMBLY Removal

11. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Removal

12. REMOVE CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Removal

13. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY WITH RADIO RECEIVER ASSEMBLY Removal

14. REMOVE HARD DISK DRIVE (w/ Navigation System for HDD) Removal

15. REMOVE NO. 1 RADIO BRACKET Removal

16. REMOVE NO. 2 RADIO BRACKET Removal

17. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY ASSEMBLY

(a) Slide the display and navigation module display assembly in the direction shown by the arrow to remove it.





18. REMOVE NAVIGATION ECU (w/ Navigation System for DVD) Removal

19. REMOVE CLOCK ASSEMBLY Removal

20. REMOVE DISPLAY AND NAVIGATION MODULE DISPLAY
pro multis · About Operation CHARM