Removal

2GR-FSE ENGINE MECHANICAL: FRONT CRANKSHAFT OIL SEAL: REMOVAL

1. REMOVE RADIATOR ASSEMBLY

HINT
Removal.

2. REMOVE V-RIBBED BELT Removal

3. REMOVE CRANKSHAFT PULLEY

(a) Using SST, loosen the pulley bolt.





SST : 09950-50013

09951-05010

09952-05010

09953-05020

09954-05021

(b) Tighten the pulley bolt to 2 or 3 threads of the crankshaft.





(c) Using SST, remove the pulley bolt and pulley.

SST : 09213-70011

09213-70020

SST : 09330-00021

HINT
Apply grease to the threads and tip of the SST (center bolt) prior to use.

(d) Remove the pulley set key of the key groove.





4. REMOVE TIMING CHAIN CASE OIL SEAL

(a) Using a screwdriver with its tip taped, pry out the oil seal.





HINT
Tape the screwdriver tip before use.

NOTICE:
After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.