Removal

SUSPENSION: FRONT STABILIZER BAR (for 2WD): REMOVAL

1. REMOVE FRONT WHEEL

2. REMOVE NO. 2 ENGINE UNDER COVER

(a) Remove the 8 bolts and the No. 2 engine under cover.





3. REMOVE FRONT STABILIZER LINK ASSEMBLY LH

(a) Remove the 2 nuts and the front stabilizer link.





HINT
If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.

4. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

HINT
Remove the RH side following the same procedures as the LH side.

5. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY LH

(a) Remove the 2 screws and the engine under cover sub-assembly LH from the front suspension member reinforcement LH.





6. REMOVE ENGINE UNDER COVER SUB-ASSEMBLY RH

HINT
Remove the RH side following the same procedures as the LH side.

7. REMOVE ENGINE UNDER COVER REAR LH

(a) Remove the 2 screws and the engine under cover rear LH.





8. REMOVE ENGINE UNDER COVER REAR RH

HINT
Remove the RH side following the same procedures as the LH side.

9. REMOVE FRONT NO. 1 STABILIZER BRACKET LH

(a) Remove the 2 bolts and the front No. 1 stabilizer bracket LH from the front suspension crossmember.





10. REMOVE FRONT NO. 1 STABILIZER BRACKET RH

HINT
Remove the RH side following the same procedures as the LH side.

11. REMOVE FRONT STABILIZER BAR

(a) Remove the front stabilizer bar from the vehicle.

12. REMOVE FRONT NO. 1 STABILIZER BAR BUSH

(a) Remove the 2 front No. 1 stabilizer bar bushes from the front stabilizer bar.

13. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT LH

(a) Remove the 4 bolts and front suspension member reinforcement LH from the vehicle.





14. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH

HINT
Remove the RH side following the same procedures as the LH side.