Removal

SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY: REMOVAL

HINT
* Use the same procedures for the LH side and RH side.
* The procedures listed below are for the LH side.
1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Removal

2. REMOVE BATTERY SERVICE HOLE COVER LH Removal

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTICE:
* After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
* When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.
4. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY Removal

5. REMOVE FRONT SEAT ASSEMBLY Removal

6. REMOVE FRONT SEAT INNER BELT ASSEMBLY

(a) for Driver Seat:

Disconnect the 3 connectors and detach the 5 clamps.

(b) for Passenger Seat:

Disconnect the 2 connectors and detach the clamp.