Installation

GARAGE DOOR OPENER: GARAGE DOOR OPENER TRANSMITTER: INSTALLATION

1. INSTALL GARAGE DOOR OPENER TRANSMITTER (w/o Sliding Roof)

(a) Install the garage door opener transmitter with the 2 screws.

(b) Connect the connector.

(c) Put the piece of tape back in order to secure the wire harness to the map light assembly.

HINT
If the tape has lost adhesion, use other tape, such as packing tape, with enough adhesion to secure the wire harness to the map light assembly.

2. INSTALL GARAGE DOOR OPENER TRANSMITTER (w/ Sliding Roof)

(a) Install the garage door opener transmitter with the 2 screws.

(b) Engage the clamp.

(c) Connect the connector.

3. INSTALL MAP LIGHT ASSEMBLY Installation