Installation

STEERING COLUMN: STEERING PAD SWITCH: INSTALLATION

1. INSTALL STEERING PAD SWITCH ASSEMBLY

(a) Engage the 2 claws, 2 pins and 2 guides to install the steering pad switch assembly.

(b) Install the 2 screws.

Torque : 2.4 Nm (24 kgf-cm, 21 in-lbf)

(c) Install the clamp.





Text in Illustration





(d) Pass the wire harness through the guide.

(e) Connect the steering pad switch connector to the spiral cable.

(f) Pass the wire harness over the 2 guides.





2. INSTALL HORN BUTTON ASSEMBLY

Installation