Console Lamp: Testing and Inspection

LIGHTING: PERSONAL LIGHT ASSEMBLY: INSPECTION

1. INSPECT ROOF CONSOLE BOX ASSEMBLY (PERSONAL LIGHT ASSEMBLY)

(a) Disconnect the Q2 personal light assembly connector.





(b) Measure the voltage and resistance according to the value(s) in the table below.

Standard voltage:





Standard resistance:





If the result is not specified, there is a malfunction on the wire harness side.

(c) Apply battery voltage to the roof console box assembly connector.





(d) Check that each light comes on.

OK:





If the result is not as specified, replace the roof console box assembly.