Removal

AIR CONDITIONING: COMPRESSOR (for 2WD): REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL Removal

2. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

3. REMOVE NO. 1 INLET AIR CLEANER Removal

4. DISCHARGE REFRIGERANT FROM REFRIGERATION SYSTEM Service and Repair

5. REMOVE V-RIBBED BELT Removal

6. REMOVE UNDER ENGINE COVER

7. REMOVE REAR UNDER ENGINE COVER LH Removal

8. REMOVE NO. 1 COOLER REFRIGERANT SUCTION HOSE

(a) Remove the bolt and disconnect the No. 1 cooler refrigerant suction hose from the compressor.





(b) Remove the O-ring from the cooler refrigerant suction hose.

NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.

9. REMOVE DISCHARGE HOSE SUB-ASSEMBLY

(a) Remove the bolt and disconnect the discharge hose from the compressor.





(b) Remove the O-ring from the discharge hose sub-assembly.

NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering.

10. REMOVE COMPRESSOR AND MAGNETIC CLUTCH

(a) Disconnect the magnetic clutch connector.





(b) Remove the 3 bolts and nut.

(c) Remove the compressor and magnetic clutch.