Installation
4GR-FSE FUEL: COLD START INJECTOR: INSTALLATION
1. INSTALL COLD START INJECTOR
(a) Install a new gasket to the intake air surge tank.
HINT
Align the protrusion of the gasket on the intake air surge tank.
(b) Install the cold start injector with the 2 bolts.
Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)
(c) Install 2 new gaskets and the hose to the cold start injector with the bolt.
Torque : 15 Nm (153 kgf-cm, 11 ft-lbf)
NOTICE:
* Be careful not to damage the gasket.
* Do not fold or bend the hose.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL Installation
3. INSPECT FOR FUEL LEAK Fuel System
4. INSTALL V-BANK COVER SUB-ASSEMBLY Installation