Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2012 >> ES 350 V6-3.5L (2GR-FE) >> Repair and Diagnosis >> Body and Frame >> Bumper >> Front Bumper >> Service and Repair >> Removal and Replacement >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





EXTERIOR: FRONT BUMPER: INSTALLATION

1. INSTALL FRONT BUMPER ASSEMBLY

(a) Connect each connector.

(b) Engage the 3 claws and install the front bumper assembly as shown in the illustration.





HINT
Use the same procedure for the RH side and LH side.

(c) Install the front bumper assembly with the 9 screws, 2 clips and bolt.





Screw (A) - Torque : 2.0 Nm (20 kgf-cm, 18 in-lbf)

(d) Install the 2 pin hold clips.





NOTICE:
Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.

HINT
Use the same procedure for the RH side and LH side.

2. INSTALL RADIATOR GRILLE PROTECTOR

(a) Install the 2 radiator grille protectors.





3. INSTALL COOL AIR INTAKE DUCT SEAL

(a) Install the cool air intake duct seal with the 7 clips.





4. VEHICLE PREPARATION FOR FOG LIGHT AIM ADJUSTMENT Adjustments

5. PREPARATION FOR FOG LIGHT AIMING Adjustments

6. FOG LIGHT AIMING INSPECTION Adjustments

7. FOG LIGHT AIMING ADJUSTMENT Adjustments
pro multis · About Operation CHARM