Operation CHARM: Car repair manuals for everyone.
Home >> Lexus >> 2012 >> IS 250C V6-2.5L (4GR-FSE) >> Repair and Diagnosis >> Transmission and Drivetrain >> Differential Assembly >> Differential Mount >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





AXLE AND DIFFERENTIAL: DIFFERENTIAL MOUNT CUSHION: INSTALLATION

1. INSTALL REAR NO. 1 DIFFERENTIAL MOUNT CUSHION

(a) Using SST, install a new rear No. 1 differential mount cushion.





Text in Illustration





SST : 09316-12010

SST : 09570-24011

NOTICE:
* Make sure that the differential mount cushion is aligned within 3° from the center.
* Be sure to use the correct combination of SST.
* Before using SST, apply grease to SST bolts.
* Temporarily install the rear No. 1 differential mount cushion to the rear suspension member sub-assembly in order to prevent it from tilting and install SST.
* Make sure that SST contacts the entire circumference of the rear No. 1 differential mount cushion.
* Do not slant the bolts of SST.
* Tighten the 2 bolts of SST equally into the 2 holes of the rear No. 1 differential mount cushion.

2. INSTALL REAR NO. 2 DIFFERENTIAL MOUNT CUSHION

(a) Using SST, install a new rear No. 2 differential mount cushion.





Text in Illustration





SST : 09316-12010

SST : 09570-24011

NOTICE:
* Make sure that the differential mount cushion is aligned within 3° from the center.
* Be sure to use the correct combination of SST.
* Before using SST, apply grease to SST bolt.
* Temporarily install the rear No. 2 differential mount cushion to the rear suspension member sub-assembly in order to prevent it from tilting and install SST.
* Make sure that SST contacts the entire circumference of the rear No. 2 differential mount cushion.
* Do not slant the bolts of SST.

3. INSTALL REAR SUSPENSION MEMBER SUB-ASSEMBLY

HINT
Refer to the procedure from Install Rear Suspension Member Sub-assembly Installation.

pro multis · About Operation CHARM