Roof Opening Panel Glass - Front Sliding

Roof Opening Panel Glass - Front Sliding

Removal and Installation

1. Remove the roof opening panel concertina blind. For additional information, refer to Roof Opening Panel Blind Roof Opening Panel Blind.

2. Remove the 4 roof opening panel glass front screws.
- To install, tighten to 8 Nm (71 lb-in).





3. Remove the 2 roof opening panel glass rear screws.
- To install, tighten to 8 Nm (71 lb-in).





4. NOTICE: It is possible for the idler mechanism to move freely once the glass panel is removed. Do not move the idler rearward or it may disengage from the idler track.

Carefully remove the roof opening panel glass.

5. To install, reverse the removal procedure.
- Initialize the roof opening panel motor(s). For additional information, refer to Roof Opening Panel Motor Initialization Programming and Relearning.