Seat Backrest Thermo-Electric Device - Second Row

Seat Backrest Thermo-Electric Device - Second Row

Removal and Installation

NOTE: For parts identification and location, refer to Seat - Exploded View, Second Row Seat - Exploded View, Second Row.

1. Release the backrest cover J-clips.





2. NOTICE: Use care when separating the backrest cover from the hook-and-loop strip, or the hook-and-loop strip may be torn from the backrest foam pad.

Separate the hook-and-loop strips and invert the backrest cover up as far as it will go.





3. Pull the backrest foam pad away from the backrest frame.

4. Disengage and disconnect the electrical connector and pin-type retainer, remove the 3 screws, disengage from the hard back panel and remove the backrest Thermo-Electric Device (TED).





5. To install, reverse the removal procedure.