Heated Seat Switch - Rear Seat

Heated Seat Switch - Rear Seat

NOTE: RH shown, LH similar.









Removal and Installation

WARNING: Never install heated seat parts not intended for use on this vehicle. Parts released for other model years or vehicle lines are not compatible even if they appear visually and physically similar. Installing incorrect parts will result in heated seat system performance outside design specification. Failure to follow this instruction may result in serious personal injury.

1. Remove the door handle bezel in the following sequence.
1. Remove the rear door handle bezel screw cover.

2. Remove the rear door handle bezel screw.

3. Separate the rear door handle bezel from the door trim panel.


2. Disconnect the electrical connector, release the clips and remove the heated seat switch from the back side of the rear door handle bezel.

3. To install, reverse the removal procedure.