Operation CHARM: Car repair manuals for everyone.
Home >> Lincoln >> 2000 >> LS V8-3.9L VIN A >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Evaporative Emissions System >> Leak Detection Valve >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Leak Detection Valve: Testing and Inspection

Canister Vent Solenoid Closing Procedure


Worldwide Diagnostic System (WDS):






SPECIAL SERVICE TOOL(S)

CAUTION: The canister vent solenoid must Rot be energized for more than nine minutes at one time. Once the canister vent solenoid is energized and de-energized, adequate time must be allowed for the component to cool adequately. Failure to allow the component to cool may create a false failure in the diagnostics, causing unnecessary repairs.

1. Connect the scan tool and select the output test mode.
2. Select the Fuel Tank Pressure (FTP) and the volts (V) Parameter Identification (PID) for monitoring.
3. Select the ALL OFF mode.
4. Close the canister vent solenoid by pushing the START button on the scan tool.
pro multis · About Operation CHARM