Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Test R

PINPOINT TEST R: DTC C1998-MODULE CALIBRATION NOT COMPLETE

Test R1:




Tests R2 - R3:






Normal Operation
The Advance Trac/IVD system needs to be recalibrated whenever a component specific to the system is disconnected or a new component is installed.

Possible Causes
^ Disconnected reconnected Advance Trac/IVD component: -module -yaw rate sensor/accelerometer -steering wheel rotation sensor
^ clearing of Advance Trac/IVD component related DTCs. (Refer to the Calibration List of DTCs)

NOTE: The Advance Trac/IVD lamp will flash when a system calibration is required Calibration is required after certain DTCs are cleared.