Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Glove Compartment: Service and Repair




Glove Compartment

Removal and Installation

1. Remove the center instrument panel finish panel. For additional information, refer to Instrument Panel Finish Panel - Center Instrument Panel Finish Panel - Center.

2. Remove the 3 RH instrument panel finish panel screws.





3. Remove the RH instrument panel finish panel.

4. Remove the RH instrument panel side finish panel.
- Pull the instrument panel side trim finish outward to release the retaining clips.

5. Open the glove compartment.

6. Lower the glove compartment in the following sequence.

1. Lift upward and remove the 2 glove compartment stops.

2. Fully lower the glove compartment.

7. Remove the 3 glove compartment screws.





8. Remove the RH lower glove compartment screw.

9. Remove the glove compartment assembly.
- Pull the glove compartment assembly outward to release the retaining clips.
- Disconnect the electrical connectors.

10. To install, reverse the removal procedure.
- To install, make sure to align the retaining clips to the adjacent retaining clip holes.