Operation CHARM: Car repair manuals for everyone.
Home >> Lincoln >> 2012 >> MKS AWD V6-3.7L >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Trim Panel >> Service and Repair >> B-Pillar Trim Panel
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

B-Pillar Trim Panel




B-Pillar Trim Panel

Removal and Installation

Upper and lower trim panels

1. Position the front and rear door weatherstrip seals aside.

2. Remove the front and rear door scuff plates. For additional information, refer to Scuff Plate Trim Panel Service and Repair.

3. Remove the lower B-pillar trim panel.
- Pull outward on the trim panel to release the 6 clips.






Upper trim panel

4. Remove the safety belt anchor bolt trim cover.





5. Remove the safety belt anchor bolt.
- To install, tighten to 48 Nm (35 lb-ft).






6. Disconnect the Belt Tension Sensor (BTS) electrical connector.





7. Remove the upper B-pillar trim panel retainer screw.
- To install, tighten to 10 Nm (89 lb-in).






8. Feed the safety belt through the upper B-pillar trim panel and remove the panel.

Upper and lower trim panels

9. NOTICE: To avoid damage to the B-pillar trim panel, remove any retaining clips from the body and attach them to the B-pillar trim panel before installing.

To install, reverse the removal procedure.

pro multis · About Operation CHARM