Exhaust Manifold: Specifications

Install 6 new RH exhaust manifold studs.
Tighten to 12 Nm (106 lb-in).

Using a new gasket, install the RH exhaust manifold and 6 new nuts. Tighten in 2 stages in the sequence shown:
Stage 1: Tighten to 20 Nm (177 lb-in).
Stage 2: Tighten to 25 Nm (18 lb-ft).











Install the RH exhaust manifold heat shield and the 3 bolts.
Tighten to 10 Nm (89 lb-in).




Install 6 new LH catalytic converter manifold-to-cylinder head studs.
Tighten to 12 Nm (106 lb-in).

Install the 3 new upper LH catalytic converter manifold-to-cylinder head nuts.
Tighten to 25 Nm (18 lb-ft).

Tighten the 3 lower LH catalytic converter manifold-to-cylinder head nuts
Tighten to 25 Nm (18 lb-ft).

Install the 2 catalytic converter manifold support bracket-to-transmission bolts.
Tighten to 48 Nm (35 lb-ft).

Install the heat shield and the 3 heat shield bolts
Tighten to 12 Nm (106 lb-in).