Component Tests and General Diagnostics
BODY CONTROL MODULE (BCM) INSPECTION1. Remove the front scuff plate inner (LH).
2. Remove the front side trim (LH).
3. Remove the dashboard under cover.
4. Set the hood release lever out of the way.
5. Remove the BCM with the connector connected.
6. Measure the voltage at each terminal is as indicated in the Terminal Voltage Tables.
- If the voltage or continuity is not as specified in the Terminal Voltage Table, inspect the parts under "Inspection item (s)".
- If the system does not work properly even though the parts or related wiring harnesses do not have any malfunction, replace the BCM.
Terminal Voltage Table (Reference)
Terminal Voltage Table (Reference) (Part 1):
Terminal Voltage Table (Reference) (Part 2):
Terminal Voltage Table (Reference) (Part 3):
Terminal Voltage Table (Reference) (Part 4):
Terminal Voltage Table (Reference) (Part 5):
Terminal Voltage Table (Reference) (Part 6):
Terminal Voltage Table (Reference) (Part 7):
Terminal Voltage Table (Reference) (Part 8):
Terminal Voltage Table (Reference) (Part 9):
