No. 3 Wheel Unit ID Registration Cannot Be Performed (TPMS Warning Light Flashes)
NO.3 WHEEL UNIT ID REGISTRATION CANNOT BE PERFORMED (TPMS WARNING LIGHT FLASHES)Caution:
^ Activate the wheel unit ID registration mode using the M-MDS, and perform the following steps if the TPMS warning light does not turn off after driving at 25 km/h (15.5 mph) or more for 10 min or more.
No. 3 Wheel Unit ID Registration Cannot Be Performed (TPMS Warning Light Flashes):
Step 1-Step 4:
Display Of M-MDS (Example)
Registered ID: OxAAAAAAAA, OxBBBBBBBB, OxCCCCCCCC, and OxDDDDDDDD (AAAAAAAA, BBBBBBBB, CCCCCCCC, and DDDDDDDD mean arbitrary numbers.)
Unregistered ID: OxOOOOOOOO
Tire pressure: aaa kPa, bbb kPa, ccc kPa, ddd kPa (aaa, bbb, ccc, and ddd mean measurement value.)
^ The battery is removed, the stored tire pressure is reset to 0 kPa.
Three registered wheel units and a replaced wheel unit
When a replaced wheel unit malfunctions
When a registered wheel unit malfunctions
When two registered wheel unit malfunction
When a replaced wheel unit and a registered wheel unit malfunction
When a replaced wheel unit and two registered wheel units malfunctions
When three registered wheel units malfunction
Two registered wheel units and two replaced wheel units
When a replaced wheel unit malfunctions
When a registered wheel unit malfunctions
When two replaced wheel units malfunction
When two registered wheel units malfunction
When a replaced wheel unit and a registered wheel unit malfunction
When two replaced wheel units and a registered wheel unit malfunction
When a replaced wheel unit and two registered wheel units malfunction
A registered wheel unit and three replaced wheel units
When a registered wheel unit malfunctions
When a replaced wheel unit malfunctions
When a replaced wheel unit and a registered wheel unit malfunction
When two replaced wheel units malfunction
When two replaced wheel units and a registered wheel unit malfunction
When three replaced wheel units malfunction
