Camber and Caster Adjustment

CAMBER AND CASTER ADJUSTMENT

1. With the vehicle in NEUTRAL, position it on a hoist. See Lifting.






2. Remove the 4 front strut upper mounting bracket nuts.

3. Push the front strut mounting bracket downward and turn it to the desired position to set the camber and caster. Both camber and caster for the front suspension are adjustable. See Steps 4 and 5.

4. Use the following table for LH side camber and or caster adjustment.


NOTE: Notice the position of the strut rod in each position.
Difference From Standard Position (LH Side)










5. Use the following table for the RH side camber and or caster adjustment.


NOTE: Notice the position of the strut rod in each position.
Difference From Standard Position (RH Side)














6. Install the 4 front strut upper mounting bracket nuts.

- Tighten to 40 Nm {4.1 kgf-m, 30 ft-lbf}.

7. Re-calibrate the steering wheel position sensor. See Initial Inspection and Diagnostic Overview.