Component Tests and General Diagnostics

BODY CONTROL MODULE (BCM) INSPECTION

1. Remove the front scuff plate inner (LH). (See Front Scuff Plate Removal/Installation)

2. Remove the front side trim (LH). Front Side Trim Removal/Installation

3. Remove the dashboard under cover. (Driver side) Dashboard Under Cover Removal/Installation

4. Set the hood release lever out of the way. Service and Repair

5. Remove the BCM with the connector connected.

6. Measure the voltage at each terminal is as indicated in the Terminal Voltage Tables.

- If the voltage or continuity is not as specified in the Terminal Voltage Table, inspect the parts under "Inspection item (s)".

- If the system does not work properly even though the parts or related wiring harnesses do not have any malfunction, replace the BCM.

Terminal Voltage Table (Reference)

Terminal Voltage Table (Reference) (Part 1):

Terminal Voltage Table (Reference) (Part 2):

Terminal Voltage Table (Reference) (Part 3):

Terminal Voltage Table (Reference) (Part 4):

Terminal Voltage Table (Reference) (Part 5):

Terminal Voltage Table (Reference) (Part 6):

Terminal Voltage Table (Reference) (Part 7):

Terminal Voltage Table (Reference) (Part 8):

Terminal Voltage Table (Reference) (Part 9):

Terminal Voltage Table (Reference) (Part 10):

Terminal Voltage Table (Reference) (Part 11):

*1
With theft-deterrent system
*2
With seat warmer system
*3
With inverter
*4
With seat position memory function
*5
With sunroof system
*6
With car-navigation system
*7
Without advanced keyless system
*8
Without AWD
*9
With DRL