C-Pillar Trim Removal/Installation

C-PILLAR TRIM REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Trunk box

b. Seat side box Seat Side Box Removal/Installation

c. Trunk end trim Trunk End Trim Removal/Installation

d. Third-row seat Third-Row Seat Removal/Installation

e. Third-row seat belt lower anchor installation bolt Third-Row Seat Belt Removal/Installation

f. Rear scuff plate inner Rear Scuff Plate Removal/Installation

g. Trunk side trim

h. Second-row seat belt upper anchor installation bolt Second-Row Seat Belt Removal/Installation

i. Roof side trim Roof Side Trim Removal/Installation

3. Partially peel back the seaming welt.

4. Remove the cover in the direction of the arrow.






5. Remove the bolt.






6. Detach clip A and tab B, and pin C by pulling them in the direction of the arrow.

7. Remove the C-pillar trim.

8. Install in the reverse order of removal.