D-Pillar Trim Removal/Installation

D-PILLAR TRIM REMOVAL/INSTALLATION

1. Remove the following parts:
a. Trunk box

b. Seat side box Seat Side Box Removal/Installation

c. Trunk end trim Trunk End Trim Removal/Installation

d. Third-row seat Third-Row Seat Removal/Installation

e. Third-row seat belt lower anchor installation bolt Rear Scuff Plate Removal/Installation

f. Rear scuff plate inner Rear Scuff Plate Removal/Installation

g. Trunk side trim

h. Roof side trim Roof Side Trim Removal/Installation

i. Third-row seat belt upper anchor installation bolt Third-Row Seat Belt Removal/Installation

2. Remove the PLG arm band. (Vehicles with PLG)






3. Partially peel back the seaming welt.

4. Remove the fasteners.






5. Detach clips A and pins B by pulling them in the direction of the arrow.

6. Remove the D-pillar trim.

7. Install in the reverse order of removal.