Seat Track: Service and Repair

LONG SLIDER REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the second-row seat. Second-Row Seat Removal/Installation

3. Remove in the order indicated in the table.










4. Remove the following parts:
a. Trunk box

b. Seat side box Seat Side Box Removal/Installation

c. Trunk end trim Trunk End Trim Removal/Installation

d. Third-row seat Third-Row Seat Removal/Installation

e. Rear scuff plate inner Rear Scuff Plate Removal/Installation

f. Third-row seat belt lower anchor installation bolt Third-Row Seat Belt Removal/Installation

g. Trunk side trim

5. Set the floor covering out of the way.

6. Remove in the order indicated in the table.










7. Install in the reverse order of removal.