Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2000 >> Protege DX L4-1.6L DOHC >> Repair and Diagnosis >> Brakes and Traction Control >> Hydraulic System >> Hydraulic Control Assembly - Antilock Brakes >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Hydraulic Control Assembly - Antilock Brakes: Service and Repair

ABS HYDRAULIC UNIT (HU)/CONTROL MODULE (CM) REMOVAL/INSTALLATION

Caution Do not drop the ABS Hydraulic Unit (HU) /Control Module (CM). Replace it if it is subjected to an Impact.

1. Remove the battery and battery tray.





2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.

CONNECTOR REMOVAL NOTE





1. Pull the lock lever up and make it unlock.
2. Remove the connector.


ABS HU/CM REMOVAL/INSTALLATION NOTE
1. When removing/installing the ABS HU/CM from/to the vehicle, attach a strip of protective tape on the ABS HU/CM connector to prevent brake fluid from entering.

CONNECTOR INSTALLATION NOTE





1. Verify that the lock lever of the harness connector is completely pulled up.
pro multis · About Operation CHARM