Rear Door: Service and Repair

REAR DOOR UNIT REMOVAL/INSTALLATION

1. Remove the following parts:
1. Sail garnish (5 door).
2. Regulator handle (Vehicles with manual window system).
3. Rear door trim.
4. Rear door garnish (5 door).
5. Rear beltline molding.
6. Rear door glass.
7. Rear door speaker.
2. Remove the rod from the outer handle.
3. Disconnect the rear door wiring harness connector.




4. Remove tabs A and B, then remove the rear door wiring harness bracket.




5. Remove screws A, B, and the fastener.
6. Remove the rear door unit.
7. Install in the reverse order of removal.