Radiator Support: Service and Repair
SHROUD PANEL REMOVAL/INSTALLATIONCAUTION: Because the shroud panel is installed to the front bumper reinforcement, support the shroud panel using a jack before removing the front bumper reinforcement so as not to apply excessive force to the shroud panel.
1. Remove the battery cover.
2. Disconnect the negative battery cable.
3. Remove the following parts:
1. Front bumper
2. Front combination lights
3. Front bumper reinforcement
4. Hood latch
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
Upper Mount Rubber Bracket Removal Note
1. Remove the upper mount rubber bracket while pressing down the upper mount rubber bracket tab in the direction of the arrow.