Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2008 >> 6 L4-2.3L >> Repair and Diagnosis >> Body and Frame >> Seats >> Service and Repair >> Removal and Replacement >> Front Seat Removal/Installation (Except L3 With TC)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Seat Removal/Installation (Except L3 With TC)

FRONT SEAT REMOVAL/INSTALLATION [EXCEPT L3 WITH TC]

WARNING: Handling the front seat (with a side air bag) improperly can accidentally deploy the side air bag, which may seriously injure you. Read air bag system service warnings and cautions before handling the front seat (with a side air bag).

CAUTION:
- When the passenger's seat is removed, perform the seat weight sensor inspection using the M-MDS after installing the passenger's seat.
- When the passenger's seat is replaced with a new one, perform the seat weight sensor calibration using the M-MDS.

1. Turn the ignition switch to the LOCK position.
2. Disconnect the negative battery cable and wait for more than 1 minute.
3. Remove the seat belt anchor (passenger's side).
4. Remove in the order indicated in the table.






5. Install in the reverse order of removal.
pro multis · About Operation CHARM