Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2009 >> 3 L4-2.3L >> Repair and Diagnosis >> Body and Frame >> Bumper >> Rear Bumper >> Service and Repair >> Removal and Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal and Replacement




REAR BUMPER REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the trunk end trim. Trunk End Trim Removal/Installation

3. Remove the fasteners and slightly bend back the trunk side trim (RH).

4. Remove the fasteners and slightly bend back the trim (LH). (4 door)

5. Remove the service hole cover (LH). (5 door)

6. Remove the rear combination light. Service and Repair

7. Disconnect the license plate light connector.






8. Remove in the order indicated in the table.










9. Install in the reverse order of removal.

Rear Bumper Removal Note

1. Pull the rear bumper ends (wheel arch) outward to detach from the bumper slider.






CAUTION:
- When detaching the rear bumper from the bumper slider, the rear bumper could fall and be damaged. Secure the rear bumper so that it does not fall.

Rear Bumper Installation Note

1. Spread the rear bumper ends (wheel arches) apart.

2. Attach the rear bumper to the body.

3. Press the rear bumper connecting area into the body to engage with the bumper slider.

pro multis · About Operation CHARM